Recent content by DPM

you'll probably need to be looking outside the US for this...

Are the battery and alternator both good? Did you try disconnecting the battery for a minute and then re-connecting?

can you hit the float bowl a tap with a mallet or lump of wood?

Umm... no Mini had torsion bars. Dry ones had rubber cones where the hydrolastic displacers were...

check the injector hasn't come loose/ compression leak at it

Did you fit new gaskets everywhere and tighten to the required torque settings?

It's an Isuzu, says so right on the block.

what radio do you have fitted?

v13 software (which hasn't any license requirements) and a clone adaptor will cost you about $60. Infact, as long as you don't need online access v16 is licensable too. https://www.ebay.co.uk/itm/124808047632 I've got one, and it works very well (not that I've needed anything other than...

Umm... nope?

any logs?

Inner CV joints.

What's this $3000 thing in the UK?

I'm currently building a house. I've gone for well insulated but not passiv, we've air tested at 1.37ACH, I've 3.2kW of built-in solar, an air source heat pump, and a diverter to put excess solar into the hot water tank. All self designed and installed. House is 2700sqft, and daily demand from...

well if the heads coming off piston protrusion is worth checking, regardless of the compression numbers